MITRA FPV Amphibious traked vehicle (5)

That is the current state of this project

Here we can see how i attach the parts to the cnc table , is a 20mm phenolic board. I start to drill 2,5mm holes that belong to the parts then i drill 2mm holes in to the phenolic to screw the wood bolts, that way after cut the perimeter of parts they stay attached to de table.

All the parts machined till now…

MITRA FPV Amphibious traked vehicle (4)

Hi, finally the frame is completed . Some tweaks on the bearing outside support have to be made, to do it i made a plastic jig and machine one at a time… it works fine.

With the small parts i did almost the same but by option.. i rough cut them then i trim the outside on the jig this time three at a time

MITRA FPV Amphibious traked vehicle (3)

Some updates on the build

After some break downs on the cnc hardware, air compressor, wireless keyboard and the air oil assist “mist”. Finally had time to give a big improvement on the production and trimming of the larger pieces.

MITRA FPV Amphibious traked vehicle (2)

First machined parts

Some luck.. the bearing fits at the first try

#mitra #fpv #traked

MITRA FPV Amphibious traked vehicle (1)

It is a long time since the local track as closed and because of that also my Rc activity.
In the mean time had been drawing a new FPV vehicle capable of running while rains and even capable of crossing puddles.
Early had experience a long runs on foot to get my previous vehicle when he overturned, with this design no need for that because run both sides.
The electronics are housed inside aluminium tubes and only the antennas are out of it.
The project not yet finished still remains draw the dome for the camera.

Lego Technic 42056 Porsche 911 GT3 RS

Box design

Box 1

Box 2

Box 3

Box 4

Box 5 Tires

To see the 360º ot the truck click this link

[360 width=”600px” height=”400px” src=”yofla360/Lego Technic 42009 Mobile Crane MKII (B2)”]

360º View Lego Technic 42009 Mobile Crane MKII (B Truck)

360º View Lego Technic 42009 Mobile Crane MKII B version, this is truck part.

Container truck measures over 3” (10cm) high, 11” (28cm) long and 3” (8cm) wide.
Can lock the container and the front and rear wheels turn in different directions at the same time.

To see the 360º ot the container stacker click this link

[360 width=”600px” height=”400px” src=”yofla360/Lego Technic 42009 Mobile Crane MKII (B1)”]

Category: Featured